oregon scientific i600 software download

Mount brass and plastic standoffs in the case to match the holes in the board. Orient the board so that the power supply sockets are facing the back right corner. Using the hardware that came with your computer case you will mount the motherboard. Now you are ready to install the new motherboard. Set the cards on the power supply with paper separating them.Īfter making your diagram remove all cables to the motherboard. It's ok to seesaw the card end-to-end slightly to loosen it, but don't bend the card sideways. If you are upgrading your present system you'll want to make a diagram of all connections before you remove them.Ĭarefully remove each expansion card from it's slot, it will be secured by a single screw. The AT socket 7 and the ATX module slot 1 each using their own power supply and case. There are 2 types, depending on what system you want to build. You are now ready to install the motherboard, also known as a main or system board. Orient the power supply with its fan so that the fan faces the back of the system case, and place into position.įasten it to the case with screws using a non-magnetic screwdriver only!

The power supply has 4 to 7 connectors that will plug into the mother board and disk drives. It also has a fan inside to keep it cool.

The power supply is a metal box and it supplies low voltage power to the various circuits inside the computer. Most computer cases come with a power supply however, in some cases it is not included, it may be necessary to purchase one separately. In this article you'll learn how to replace these parts. If your computer is acting up, chances are it may need a new power supply or motherboard.

Oregon scientific i600 software download